WINDY RIDGE TRAPPER "Yep, I'm the preacher who buys fur"
WINDY RIDGE TRAPPER
"Yep, I'm the preacher who buys fur"
News & Updates

Archive

Coyote & Bobcat Traps, Removal, Trapping

 

Below is a list of traps that work great for coyote and bobcat trapping...

 

MB650OL
MB 650-OL (Outside Laminated Jaws)
The MB-650 comes with 1/4" offset jaws and a 6 1/8" inside jaw spread. The MB-650 is 4-coiled, base plated, center swiveled and has an extra heavy duty oversized pan which provides for a huge kill area. The pan tension is adjustable with a #10 brass pan bolt. Both heavy jaws are held down by the trigger system which will keep any animal from flipping up a loose jaw. The dog has a "step-down" notch milled into it that gives you an audible click when you're lowering the pan. MADE IN USA!!!

==============================================================


MB 650-IL (Inside Laminated Jaws)
The absolute best coyote and bobcat trap on the market. Details: This trap is laminated on the inside of jaws. The MB-650 comes with 1/4" offset jaws and a 6 1/8" inside jaw spread. The MB-650 is 4-coiled, base plated, center swiveled and has an extra heavy duty oversized pan which provides for a huge kill area. The pan tension is adjustable with a #10 brass pan bolt. Both heavy jaws are held down by the trigger system which will keep any animal from flipping up a loose jaw. The dog has a "step-down" notch milled into it that gives you an audible click when you're lowering the pan. MADE IN USA!!!


==========================================================

Ready to buy some trapping supplies? We recommend Murray's Lures and Trapping Supplies!!! <<<CLICK HERE

========================================


MB 650-IL/OL (Inside/Outside Laminated Jaws)
The absolute best coyote and bobcat trap on the market. MADE IN USA!!!

====================================================
mb650rj
MB 650-RJ (Rubber Jaws)
The MB-650-OS with J.C. Conner Rubber Pad Kits installed. A top quality combination! The MB-650-RJ is heavy duty from top to bottom and comes with 1/4" offset jaws and a 6 7/8" outside jaw spread and 5 7/8" inside jaw spread. The MB-650-RJ is 4-coiled, base plated, center swiveled and has an extra heavy duty oversized pan which provides for a huge kill area. The pan tension is adjustable with a #10 brass pan bolt. Both heavy jaws are held down by the trigger system which will keep any animal from flipping up a loose jaw. The dog has a "step-down" notch milled into it that gives you an audible click when you're lowering the pan. MB Crunch Proof Swivels and heavy duty American-made chain to top it off. * The MB-650, designed by trappers for trappers with animal comfort in the forefront.

========================================================
MB650 Cast
MB-650-C (Cast Jaws)
Minnesota Brand MB 650 coyote trap with malleable cast jaws. These jaws are 3/8" thick and super heavy. Heavy duty from top to bottom. This trap is 4 coiled, base plated, center swiveled, and comes with a heavy duty oversized pan for a huge target area. Both jaws are held down by the trigger system to keep any animal from flipping up a loose jaw. The trap has a step- down notch on the dog to give you an audible click when lowering the pan, Heavy swivels and chain top it off.

================================================================

Ready to buy some trapping supplies? We recommend Murray's Lures and Trapping Supplies!!! <<<CLICK HERE

========================================

650 setter
MB650 Setter
MB-650 Trap Setters - 1 pair. The New Improved MB-650 Trap Setter.....The best setting tool ever for setting the MB-650 Traps. You can now easily set the MB-650 with your two hands. Set traps while sitting or standing.. Knee deep snow, mud, weater? No Problem. These lightweight tools make setting the MB-650 Coyote and Bobcat traps easy.

================================================

MB550
MB-550-RC
The 550-RC has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick and the offset is 3/16". Paws-I-Trip pan and night latch dog are standard. The round dog design doesn't allow coyotes to bite and bend the dog as easily as standard flat dogs. Pan tension out of the box runs an average of 2 # which we have found to be a very good number for a multi species trap. Tested extensively over a two year period on coyote, bobcat, red fox, and grey fox. This trap is fast and excellent results were obtained using it two coiled in wet heavy red clay. If you are not planning on 4-coiling your MB-550-RC's the manufacturer strongly recommends cutting the excess spring pins off leaving 1/2" protruding from the frame.

===========================================================

Ready to buy some trapping supplies? We recommend Murray's Lures and Trapping Supplies!!! <<<CLICK HERE

========================================

MB 550 CL
MB-550 Straight Jaw (closed jaw design)
The 550-CL (2-Coil) Closed Jaw. It has an outside jaw spread of 5 1/2" and an inside jaw spread of 4 3/4". The cast jaw face is 3/8" thick. Paws-I-Trip pan system and night latch dog is standard. Pan tension out of the box (un-waxed) on the two coiled version runs an average of 2.1 pounds which we have found to be a very good number for a multi species trap. This trap is fast and excellent results were obtained using it two coiled. The 550 is an excellent live market trap as well as the trap to use on a mixed species line. Small enough for fox and tough enough for the nastiest coyote. If you are not planning on 4-coiling your MB-550-RC's the manufacturer strongly recommends cutting the excess spring pins off leaving 1/2" protruding from the frame.

===========================================================

MB-550 Rubber Jaw
Now Available!!! The 550-Rubber Jaw (2-Coil). We've installed a Paws-I-Trip pan system and night latch dog. Pan tension out of the box (un-waxed) on the two coiled version runs an average of 2.1 pounds which we have found to be a very good number for a multi species trap. This trap is fast and excellent results were obtained using it two coiled. We do not recommend using the 4-coiled version if grey fox is your target animal. The 550 is an excellent live market trap as well as the trap to use on a mixed species line. Small enough for fox and tough enough for the nastiest coyote. If you are not planning on 4-coiling your MB-550-RC's the manufacturer strongly recommends cutting the excess spring pins off leaving 1/2" protruding from the frame.

=====================================================================

Ready to buy some trapping supplies? We recommend Murray's Lures and Trapping Supplies!!! <<<CLICK HERE

========================================

Duke 1 3/4 Four Coil
Duke #1 3/4 Coilspring 4x (4 coils)
5-1/4" Jaw Spread: Great trap for coon, fox, bobcat, and coyote. This is a great trap for anyone who targets fox, but still wants a trap strong enough to hold a bobcat or coyote.

=====================================================================

Bridger 2 CS
Bridger #2 Coilspring (2 coils)
#2 Coilspring - 5 3/4" jaw spread. Regular jaw, two-coiled. A duplicate of the popular #2 Northwoods coilspring. Center swiveled. Heavy frame and jaws Strong springs. For coyote and bobcat.


=============================================================

Bridger 3 CS
Bridger #3 Coilspring (2 coils)
Bridger #3 Regular jaw, 2-coil. Northwoods design. 6 1/8" inside jaw spread, 6 1/2" outside jaw spread, center swiveled. Heavy frame and jaws. Strong springs. A good heavy trap for coyote and bobcat.

==========================

Ready to buy some trapping supplies? We recommend Murray's Lures and Trapping Supplies!!! <<<CLICK HERE

========================================

 How to catch various animals...


Coyote, fox, bobcat, coon:
*Steel (leg-hold) traps should be boiled in dye once per year to prevent rusting. It's probably a good idea to boil them in was once per year too. We sell both wax and dye on this website.

*The easiest way to catch a coyote, bobcat, or fox is with a "dirt hole" set. Do a you-tube search for "dirt hole" sets to learn how. Also, you should go to the following website for detailed step-by-step process on making a dirt hole set: http://www.trapperman.com/trapperman/dirthole_set.html

*To make dirt-hole sets, you'll need to order a few more trapping supplies (sifter and digging tool). The diamond mesh sifter and groundhog tool are great choices!

*You'll need to anchor your trap with a trap stake. 15" stakes are good if you're trapping in solid ground, but if you're trapping in soft ground you should go with the longer 30" stakes. You can attach your trap to the cable-stake with a j-hook. (and you can crimp the j-hook onto the stake with some pliers.)

*In order to drive the berkshire stakes into the ground, simply take a piece of re-bar with a flat point grinded on it's end, and then use the bar to drive the stake into the ground. For the fox hollow (bullet) stakes that I sell, you'll need a special driver for them, and you can order fox hollow drivers on my website.

*When trapping for coyotes, fox, or bobcats, most trappers agree that it is best to use a strong smelling bait, gland lure, or even both. We offer a wide assortment of various baits and lures on this website.


Trying to catch muskrats? Here's a good link to visit... http://www.trapperman.com/trapperman/assorted_muskrat_sets.html


Trying to catch beavers? Visit this link... http://www.trapperman.com/trapperman/castor-mound.html


Raccoon Trapping Video, with a cage trap...


Raccoon Trapping Video, with dog-proof traps...